14
Setting COOKTOP LOCKOUT
The
pad is used to activated the COOKTOP LOCKOUT
feature which will lock all surface elements from being
accidentally turned ON. This feature will lock only the cooktop.
To turn the COOKTOP LOCKOUT feature on:
1. Be sure all surface elements controls are set to the
OFF position.
2. Press and hold
until one beep sounds (about 3
seconds). If a triple beep sounds, check to be sure all
surface control elements are in the OFF position.
The COOKTOP LOCKED indicator light will turn ON and
the cooktop controls and functions are locked out until the
cooktop is unlocked.
To turn the COOKTOP LOCKOUT feature OFF:
1. Be sure all surface element controls are set to the OFF
position.
2. Press and hold
until one beep sounds (about 3
seconds). If a triple beep sounds, check to be sure all
surface control elements are in the OFF position.
The COOKTOP LOCKOUT indicator light will turn OFF and
the cooktop may be used normally.
Important notes:
• Starting a Select Clean cycle will also turn ON the
COOKTOP LOCKOUT feature.
• If a power failure occurs after the COOKTOP LOCKOUT
feature has been activated, you must turn OFF the
COOKTOP LOCKOUT feature before being able to use
the cooktop features again.
Setting Surface Controls
Summary of Contents for 970-6363*
Page 34: ......