13
Operating Instructions
Use a low-sudsing, high e
ffi
ciency
detergent to prevent oversudsing in
front load washers. Look for this symbol
on the detergent label:
For best results
Operating Your Washer, continued
IMPORTANT
Open and close the dispenser drawer slowly. Closing the
drawer too quickly could result in early dispensing of the
bleach or fabric softener.
IMPORTANT
To prevent fabric damage, do not over
fi
ll the “LIQUID
BLEACH” chamber or pour liquid chlorine bleach directly
onto the load.
IMPORTANT
Do not mix liquids and powders.
5 Add laundry products to the dispenser.
Detergent, liquid chlorine bleach and liquid fabric soft-
ener will be dispensed at the proper times in the cycle.
Liquid or Powder Detergent
Use the cap or scoop provided by the detergent
•
manufacturer to measure the amount recommended.
Detergent dosage may need to be adjusted for water
•
temperature, water hardness, load size and soil level.
Other Wash Products
Color-safe bleach, water conditioner, detergent booster
and enzyme products may be added with the detergent.
Put liquid products with liquid detergent in the “DETER-
GENT WASH” chamber or powder products with pow-
der detergent in the “DETERGENT WASH” chamber.
Liquid Chlorine Bleach
If desired, add liquid chlorine bleach to the cham-
•
ber labeled “LIQUID BLEACH” and marked with this
symbol
.
Fill to the MIN line for small loads or the MAX line for
•
large loads.
DO NOT
fi
ll above the maximum
fi
ll line.
•
Add color-safe bleach with the detergent.
•
Liquid Fabric Softener
If desired, pour the recommended amount of liquid
•
fabric softener into the chamber labeled “FABRIC
SOFTENER” and marked with this symbol .
Fill to the MIN line for small loads or the MAX line for
•
large loads.
DO NOT
fi
ll above the maximum
fi
ll line.
•
Use of a fabric softener-dispensing ball is not recom-
•
mended in tumble action washers.
6 Select the appropriate cycle and settings for
the load.
Turn the cycle selector knob in either direction to
•
select the cycle desired.
The estimated cycle time, suitable wash and rinse
•
water temperatures,
fi
nal spin speed, soil level, and
options for each cycle will be indicated for the cycle
selected. See the “Washer Settings Chart” for more
details.
To change the settings, press the
•
Auto Temp
,
Spin
Speed
and
Soil Level
buttons to scroll to the desired
settings.
NOTE
From time to time you may see water in the “LIQUID
BLEACH” and “FABRIC SOFTENER” chambers. This is
part of the normal operation of the washer.
NOTE
To prevent staining, do not over
fi
ll the “FABRIC
SOFTENER” chamber or pour liquid fabric softener
directly on the wash load.
IMPORTANT
Use of multi-product (detergent plus softener) sheets or
color-absorbing sheets
NOT
recommended. They could
disable your machine and result in unwarranted repair
costs.
Summary of Contents for 970.C4804 Series
Page 26: ...26 Notes ...
