10
Electronic Control Features
Replace Air Filter
When the “REPLACE AIR FILTER” LED is illuminated yellow, the air filter needs to be
replaced. The control will signal for air filter replacement after 3600 hours of operation.
After replacing the air filter, reset the air filter timer by pressing the AIR FILTER key
for 3 seconds. The “REPLACE AIR FILTER” LED will be illuminated green for 3 seconds,
confirming a timer reset.
Controls
Setting the Electronic Control
Cool Down Period
For safe food storage, allow 4 hours for the appliance to cool down completely. The unit
will run continuously for the first several hours.
Electronic Control
The Electronic Control is located inside the appliance. Temperature is factory preset to
provide satisfactory food storage temperatures. However, the temperature control is
adjustable to provide a range of temperatures for your personal satisfaction.
To adjust the temperature setting, press the UP (^) key for warmer temperature and DOWN
(v) key for colder temperature on the control panel. Allow several hours for the temperature
to stabilize between adjustments. The unit can be adjusted between -10°F (-23°C) and 10°F
(-12°C). By pressing the TEMP MODE key, the temperature display will toggle between °F
to °C.
To turn the appliance OFF, press the UP (^) key until the warmest temperature setting of
10°F (-12°C) shows in the display. Then press the UP (^) key 3 times within 3 seconds. To turn
the unit back ON, press the DOWN (v) key 3 times within 3 seconds. The control will then display
“10°F (-12°C)” and may be adjusted to the desired temperature.
