13
Controls
Alarms
There are 4 possible conditions that will cause the alarm tone to sound.
High Temp Alarm
If the temperature inside the cabinet has exceeds 23ºF (-5ºC), the HIGH TEMP LED will
illuminate, and, after 1 hour, the HIGH TEMP Alarm will sound with 4 short beeps every
½ second, and the cabinet temperature shows in the display. The LED and temperature
alarm will remain active until the cabinet temperature is below 23ºF (-5ºC).
The audible alarm can be turned off by pressing Alarm Reset key.
Door Ajar Alarm
This alarm will sound to alert you that the door has been open for 5 minutes or more. The
Door Ajar LED will illuminate and the audible alarm will sound until the door is closed.
The audible alarm can be turned off by pressing the Alarm Reset key or by closing the
door. If the door is ajar for 15 minutes, the interior light will turn off.
Temp Error Alarm
The sensor alarm signals you that a problem exists with a temperature sensor. The audible
alarm will sound after 1 hour and the display will alternate between “E8” or “E9” and
-10°F (-23°C) at ½ second intervals. The control will then enter a mode that runs the
appliance in a manner that maintains the factory set cabinet temperature.
The audible alarm can be turned off by pressing the Alarm Reset key.
Stuck Key Alarm
The stuck key alarm will sound if the control reads a keypress for longer than 30 seconds.
The audible alarm will sound and will be limited to 1 minute and will stop automatically.
The display will alternate between “E7” and -10°F (-23°C) at ½ second intervals. The
control will then enter a mode that runs the appliance in a manner that maintains the
factory set cabinet temperature until the condition is resolved.
The audible alarm can be turned off by pressing the Alarm Reset key.
