background image

12

A

B

C

D

Normal Operating Sounds

You may or may not hear the following sounds from your 

new dryer:

A. SUSPENSION ROLLERS

 The dryer drum is supported 

by a set of suspension rollers. At times there may be a 

thumping or rolling sound when the dryer starts. This may 

happen if the dryer has not been in use for a period of 

time, or after a heavy load has remained in the dryer 

drum for an extended period, creating a temporary 

fl

 at 

spot on the edge of the roller. The noise should dissipate 

as the dryer operates and any 

fl

 at spots smooth out.

B.  AIR FLOW SYSTEM

 Your dryer is equipped with a high 

volume air handling system. In some installations there 

may be some sounds associated with air movement 

throughout the dryer, including the air duct, blower, and 

exhaust system. This is normal and can vary with load 

size and type.

C.  GAS VALVE (Gas models only.)

 The 

fl

 ow of gas is 

controlled by electric solenoids. During operation there 

may be a clicking sound as the valve opens and closes to 

control the gas 

fl

 ow.

D. GAS BURNER (Gas models only.)

 When the burner is 

operating, there may be sounds generated as the air 

fl

 ow 

mixes with the gas 

fl

 ame. This noise is normal and will 

only occur when the gas is ignited in the combustion tube.

CAUTION

Do not continue to use the dryer if you hear squeaking, 

grinding, rubbing or other unusual noises. This could 

be a sign of mechanical breakdown and lead to 

fi

 re or serious injury. Contact a quali

fi

 ed technician 

immediately.

Operating Instructions

Summary of Contents for 970L8802 Series

















Reviews: