- 10 -
5.
Select a position on the handle 3-way
On/O
ff
switch. Slide the switch forward to
the CARPET position to turn on suction from
the canister motor and the
PowerMate
®
brushroll. The
CARPET indicator button will turn
green, and the PowerMate
®
brushroll will start to spin.
Slide the switch forward to
the CARPET position to turn on
suction from the canister motor
and the PowerMate
®
brushroll.
The CARPET indicator button will
turn green, and the PowerMate
®
brushroll will not spin.
Slide the switch forward to the
FLOOR position to turn on
canister motor suction only. The FLOOR
indicator button will turn green, and the
PowerMate brushroll will not spin.
Slide the switch all the way back to turn the
vacuum cleaner o
ff
. The CARPET and FLOOR
indicators will both become gray.
WARNING
Personal Injury and Product Damage
Hazard
• DO NOT run over power cord with
PowerMate
®
. Personal injury or product
damage could result.
• DO NOT pull plug from wall by the
power cord. If there is damage to the
cord or plug, personal injury or property
damage could result.
To rewind:
Turn o
ff
and unplug the vacuum
cleaner. Hold the plug while rewinding to
prevent damage or injury from the moving
cord. Push cord rewind button.
1.
Pull cord out of canister to desired length.
The cord will not rewind until the cord rewind
button is pushed.
3.
Lower the wand from upright position by
pressing on the
HANDLE RELEASE
pedal.
2.
Plug the polarized power cord into a 120
Volt outlet located near the
fl
oor.
4.
Select a pile height setting by pressing
the height adjustment pedal on the rear of
the PowerMate
®
. The pile height setting
shows on the indicator.
Handle
Release
Height
Adjustment Indicator
Height
Adjustment
Pedal
