background image

2. Close dust cup lid until you hear a click.

WARNING: 

Do not operate vacuum 

cleaner without filters in place.
1. With one hand grasped around the 

handle, press the filter release button to 

separate the dust cup and filters from 

the hand vacuum. 

VACUUM MAINTENANCE AND CARE

      CAUTION

To reduce the risk of electric shock, remove the charging adapter from the unit, and 

make sure the unit is turned off before any maintenance.

EMPTYING DUST CUP AND CLEANING FILTER

Dust Cup Emptying

For best performance, empty dust cup 

after every use or once dust reaches max 

fill line. Never operate the vacuum cleaner 

without dust cup and filter in place.

Before emptying the dust cup, ensure the 

vacuum is turned off.

1. Position dust cup lid area of vacuum 

over a waste receptacle. Press down the 

dust cup release latch to open dust cup 

lid and allow cup contents to drop into 

waste receptacle.

Filter Cleaning

If there is hair wrapped or blocked in the 

dust cup or the suction power is weak, it is 

necessary to wash the HEPA filter and pre-

filter basket to clean off accumulated dust 

or hair.

- 13 -

Dust Cup 
Release 
Latch

Filter Release Button

Click

Summary of Contents for CSV Go 125.10438910




















Reviews: