background image

Product Record

IMPORTANT: Fill out the product record information below.

CAUTION

For residential use only. Do not use for commercial 
cooking.

DANGER

Safety Symbols

The symbols and boxes shown below explain what each heading 
means. Read and follow all of the messages found throughout 
the manual.

DANGER: 

 Indicates an imminently hazardous situation 

which, if not avoided, will result in death or serious injury.

WARNING

WARNING: 

 Be alert to the possibility of serious bodily injury 

if the instructions are not followed. Be sure to read and 
carefully follow all of the messages.

CAUTION

CAUTION:

 Indicates a potentially hazardous situation which, 

if not avoided, may result in minor or moderate injury.

Model Number

Serial Number

Date Purchased

See rating label on grill for serial number.

1. Do not store or use gasoline or other 

flammable liquids or vapors in the vicinity of 
this or any other appliance.

2. An LP Tank not connected for use shall not 

be stored in the vicinity of this or any other 
appliance.

WARNING

DANGER

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. Open lid.

4. If odor continues, keep away from the appliance 

and immediately call your gas supplier or your 
fire department.

Installation Safety Precautions

• Use grill, as purchased, only with LP (propane) gas and the 

regulator/valve assembly supplied.

• Grill installation must conform with local codes, or in the 

absence of local codes, with either the National Fuel Gas 
Code, ANSI Z223.1/ NFPA 54, Natural Gas and Propane 
Installation Code, CSA B149.1, or Propane Storage and 
Handling Code, B149.2. 

• All electrical accessories (such as a rotisserie) must be 

electrically grounded in accordance with local codes, or 
National Electrical Code, ANSI / NFPA 70 or Canadian 
Electrical Code, CSA C22.1.  Keep any electrical cords and/or 
fuel supply hoses away from any hot surfaces.

•  Grill is not for use in or on recreational vehicles and/or boats.
• This grill is safety certified for use in the United States and/or 

Canada only. Do not modify for use in any other location. 
Modification will result in a safety hazard.

To Installer/Assembler: Leave these instructions with 
consumer.

To Consumer: Keep this manual for future reference.

Call the Grill Information Center for Help and Parts

Missing Parts? Assembly Questions?
Before returning grill to store, call 

1-800-241-7548

Some parts may contain sharp edges, 

 

especially 

as noted in these instructions.
Wear protective gloves if necessary.

CAUTION

Operation Problems?

Printed in China

© 2011 KCD IP, LLC

WARNING

CALIFORNIA PROPOSITION 65
1. Combustion by-products produced when using this 
product contain chemicals known to the State of 
California to cause cancer, birth defects, and other 
reproductive harm.

2. This product contains chemicals, including lead 
and lead compounds, known to the State of 
California to cause cancer, birth defects or other 
reproductive harm.

Wash your hands after handling this product. 

2 • 466424712

Summary of Contents for D02 M90225





























Reviews: