background image

14

 Install Grates, Warming Rack and Battery
     
    

4

15

  LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP tank.  Fill

    and leak check before attaching to grill and regulator (see Use and Care section).

  

Place LP tank into hole in bottom shelf with tank collar opening facing the front right leg of cart as 

shown.  Finger tighten tank thumbscrew to hold LP tank securely in place.

CAUTION

Failure to install tank correctly may cause gas hose 
to be damaged in operation, resulting in the risk of 
fire.

See Use and Care section to correctly Leak Test and 
perform the Burner Flame Check.

LP Tank

Tank Thumbscrew

Warming Rack

Cooking Grate

+

_

AAA Battery

  Insert grates so that side with four corner feet face down.  To obtain sear marks in cooked meat, be 

sure to insert grates so that side with four corner feet faces down.  Install warming rack into firebox 
with legs inserted into sidewall holes as shown.

  Unscrew ignitor cap and insert AAA battery into ignitor slot with positive end(+) facing outward. 

Replace the ignitor cap.

24 · 466424712

Summary of Contents for D02 M90225





























Reviews: