Kenmore Elite 790.9751 Series User Manual Download

Page: 3 / 44

• Never modify or alter the construction of an

appliance by removing panels, wire covers or

any other part of the product.

• Remove the oven door from any unused

appliance if it is to be stored or discarded.

Stepping, leaning, sitting or pulling

down on the door of this appliance can result in

serious injuries and may also cause damage to

the appliance.

Do not allow children to climb or

play around the appliance.

• Storage on Appliance. Flammable materials

should not be stored near surface units.

This

includes paper, plastic and cloth items, such

as cookbooks, plasticware and towels, as well

as flammable liquids. Do not store explosives,

such as aerosol cans, on or near the appliance.

Flammable materials may explode and result in

fire or property damage.

Do not use the ovens for storage.

Do not store items of interest to

children in the cabinets above an appliance.

Children climbing on the appliance to reach items

could be seriously injured.

• Do not leave children alone. Children should

not be left alone or unattended in the area

where an appliance is in use. They should never

be allowed to sit or stand on any part of the

appliance.

• DO NOT TOUCH SURFACE UNITS, AREAS

NEAR THESE SURFACES, OVEN HEATING

ELEMENTS OR INTERIOR SURFACES.

Surface

units may be hot even though they are dark in

color. Areas near surface units may become hot

enough to cause burns. During and after use,

do not touch, or let clothing or other flammable

materials touch these areas until they have had

sufficient time to cool. Among these areas are

the cooktop, surfaces facing the cooktop, the

oven vent openings and surfaces near these

openings, oven door and window.

• Remove all tape and packaging before using

the appliance. Destroy the carton and plastic

bags after unpacking the appliance. Never

allow children to play with packaging material.

• Proper Installation. Be sure your appliance is

properly installed and grounded by a qualified

technician in accordance with National

Electrical Code ANSI/NFPA No.70 (USA) or CSA

C22.1, PART 1 (Canada)-latest edition and local

code requirements.

Install only per installation

instructions provided in the literature package

for this appliance.

• In case of an emergency, know how to

disconnect the electrical power to the appliance

at the circuit breaker or fuse box.

• User Servicing. Do not repair or replace

any part of the appliance unless specifically

recommended in the manuals.

All other

servicing should be done only by a qualified

technician to reduce the risk of personal injury

and damage to the appliance. Sears Parts &

Repair is the recommended repair service for

this appliance.

This manual contains important safety symbols and instructions. Please pay attention to these

symbols and follow all instructions given.

This symbol will help alert you to situations that may cause serious bodily harm,

death or property damage.

This symbol will help alert you to situations that may cause bodily injury or

property damage.

IMPORTANT SAFETy INSTRUCTIONS

Read all instructions before using this appliance.

• All appliances can tip.

• Injury to persons could result.

• Install anti-tip bracket packed with

unit.

• See Installation Instructions.

To reduce the risk of tipping, the

appliance must be secured by

properly installed anti-tip bracket

provided with the appliance. To check if the

bracket is installed properly; grasp the top rear

of the appliance and carefully attempt to tilt it

forward. Refer to the Installation Instructions

for proper anti-tip bracket installation.

Summary of Contents for Elite 790.9751 Series













































Search results

Summary of Contents for Elite 790.9751 Series

Reviews:

Related manuals for Elite 790.9751 Series

Brands by name

Popular brands

Kenmore Elite 790.9751 Series, User Manual

Search results

Summary of Contents for Elite 790.9751 Series

Reviews:

Related manuals for Elite 790.9751 Series

Brands by name

Popular brands