29
Changing the Filter (Continued)
Ordering Replacement Filters
Order new filters through the dealer
where you bought your refrigerator. You
may want to consider ordering extra filters
when you first install your refrigerator.
Air Filter Replacement cartridge,
part #9920
Air Filter (select models)
The air filter is located under the utility
bin.
Replacing your Kenmoreclean!
TM
Air Filter
To ensure optimal filtering of refrigerator
odors, you should change the air filter
every six months (the filter status light on
the Touch Panel prompts you to replace
the filter after six months).
1. Open the air filter door.
2. Remove the old filter and discard it.
3. Unpack the new filter and slide it
into the housing. The open face of
the filter should be installed facing
downward.
4. To close the air filter door, push the
top and bottom to lock the door
closed.
5. Press and hold the Air Filter Reset
button on the control panel for three
seconds. When the display changes
from “Replace” to “Good,” the status
has been reset.
6. The Air Filter Reset will turn itself off
after a few seconds.
3. Slide the old water filter cartridge straight
out of the housing and discard it.
4. Unpackage the new filter cartridge. Using
the alignment guide, slide it gently into the
filter housing until it stops against the snap-
in connector at the back of the housing.
5. Push firmly until the cartridge snaps into
place (you should hear a click as the
cartridge engages the snap-in connector).
6. Turn On ice maker.
7. To reset the water filter on your IQ-Touch
control, press and hold the water filter
icon for three seconds. When the display
changes from Red to Green, the status
has been reset.