Kenmore SSV Quick Clean 125.10440710, Use & Care Manual

2. If necessary, clean off 

hair and other debris 

wrapped around the 

pre-filter. Rotate pre-

filter clockwise to 

remove from dust cup 

chamber for cleaning. 

3. Insert pre-filter back into chamber and 

rotate counterclockwise to lock. Close 

dust cup lid until you hear a click. 

After repeated use, it is necessary to wash 

the HEPA filter and 2 foam filters clean of 

accumulated dust. 

WARNING: 

Do not operate vacuum 

cleaner without filters in place.
1. Open the filter cover on top of hand 

vacuum by squeezing the two release 

buttons inward and lifting off. Remove 

HEPA filter and small foam filter from 

forward area of filter chamber. Remove 

round foam filter from inside of HEPA. 

3. Place the small foam filter back into the 

front of the filter chamber.

    Place the round foam filter into the 

center of the HEPA filter. Insert the HEPA 

filter into filter chamber and reattach 

filter cover.

IMPORTANT:

 The HEPA and 2 foam 

filters must dry completely before reuse.

VACUUM MAINTENANCE AND CARE

       CAUTION

To reduce the risk of electric shock, turn power off and remove the unit from the 

charging dock before any maintenance.

EMPTYING DUST CUP AND FILTER CLEANING

For best performance, empty dust cup 

after every use or once dust reaches max 

fill line. Never operate vacuum cleaner 

without dust cup and filter in place. 
Before emptying the dust cup, ensure the 

vacuum is turned off.
1. Position dust cup area of vacuum over 

a waste receptacle. Press down on the 

dust cup release button to open dust cup 

lid and allow cup contents to drop into 

waste receptacle. 

Dust Cup

Release Button

Click

2. Brush loose debris 

    from HEPA filter 

    and then rinse with 

    warm water. Rinse and gently squeeze 

dry the foam filters. Set all filters aside 

and allow to air dry. 

OFF

ON

Small 

Filter

Round Foam 

Filter

HEPA Filter

- 14 -