2
KENNEDY
thoroughly recommends reading these instructions before using the trolley
jack, even if you have used a trolley jack on a vehicle before. Reading these instructions
carefully and understanding them fully will enable you to raise a vehicle correctly and will
prevent injury to yourself or someone else as well as damage to the vehicle and equipment.
Because this product is also used in conjunction with axle stands, please follow all
relevant safety instructions regarding the lifting and supporting of vehicles.
SAFETY GUIDELINES
BEFORE USING FOR THE FIRST TIME, THE TROLLEY JACK WILL NEED BLEEDING.
PLEASE SEE PAGE 6 FOR FURTHER INSTRUCTIONS.
l
Always take care to avoid injury when carrying or moving the jack.
l
Always check vehicle owner’s manual for correct vehicle weight.
l
Always use on specified jacking points, on a level surface and with a solid
foundation.
l
Always check that jacking points are not corroded before use.
l
Always engage the handbrake before the vehicle is lifted and use wheel chocks
at the end of the vehicle opposite the jack to guard against wheel movement.
l
Never use for manoeuvring vehicles.
l
Never use the jack if you suspect a fault. See the ‘Trouble Shooting’ section on
page 6 for further information.
l
Never lift a car when somebody is under it, even with secure axle stands.
l
Never work under a vehicle only supported by a jack. After lifting the vehicle,
support immediately with properly rated axle stands.
l
Never exceed the rated load capacity or tamper with the factory set overload
valve.
l
Never lean against the raised vehicle.
l
Never modify the jack, it is not designed to support extensions or cradles and
could become unsafe.
QUALITY KENNEDY AUTOMOTIVE PRODUCTS
AVAILABLE FROM YOUR DISTRIBUTOR
