background image

Contents 

 

ii 

Contents 

 

Copyrights .................................................................................................i

 

Liability Disclaimer ...................................................................................i

 

Contents....................................................................................................ii

 

1. Before You Start ...................................................................................1

 

1.1. Tools Suggested

.......................................................................................... 1

 

2. Opening the Device..............................................................................2

 

2.1. Remove the Front Cover

.............................................................................. 2

 

2.2. HDD Installation

............................................................................................ 3

 

2.3. RAM Installation

........................................................................................... 5

 

How to Install the RAM .............................................................................................................5

 

How to Uninstall the RAM.........................................................................................................5

 

3. Mainboard and Component Replacement .........................................6

 

3.1. How to dissemble the mainboard from the device

.................................... 6

 

3.2. Unplug SCSI Cable

....................................................................................... 8

 

3.3. Unplug COM Port Cable

............................................................................... 9

 

3.4. Unplug VGA Port Cable

............................................................................. 10

 

3.5. Unplug Phone Jack Cable

..........................................................................11

 

3.6. Unplug IDE Cable

....................................................................................... 12

 

3.7. Heat Sink Dissemble

.................................................................................. 12

 

3.8. Power Switch Dissemble

........................................................................... 13

 

Summary of Contents for BPC-70-B-C1G

















Reviews: