Installation instructions
1.
Slide wood panel (A) into metal
frame (B) and secure with two wood
screws (C).
If installing to studs, please see below:
3B.
Drill pilot holes on the marked
spots and insert (2) plastic anchors (not
supplied).
3C.
Install (2) wood screws (not
supplied) to the (2) plastic anchors.
4.
Hang shelf to wall by attaching the
keyholes on back of the metal frame (B) to
the nails or wood screws.
NOTE: Hardware not supplied, contact
your local hardware professional to
choose an attachment mechanism
appropriate for your wall.
Wood screw
(not supplied)
Hole in wall
Plastic anchor
(not supplied)
B
2.
Measure the distance between the
keyholes, mark spots on the wall.
3A.
Install (2) nails (not supplied)
to the studs.
A
B
C
Care and maintenance
Wipe clean with a dry, soft cloth.
Do not used any harsh chemicals or
abrasive cleaners.
Keyholes
If installing to drywall, please see below:
