R AD AR
11
1.6
1.7
1.8
Other notice
(1)
(2)
(4)
(5)
(7)
(6)
(3)
The operator should wear appropriate clothing, safety shoes, helmets and goggles.
The surrounding around the machine cannot store unnecessary obstacles and the
remaining oil, avoid the operator slipping.
Do not allow to touch any switches by wet hands.
The treatment of waste oil, used oil, cooling water and the iron filings, should be based
on local government environmental regulations.
Do not move the fingers on the door age to avoid being crushed.
When use the crane to move machine, ensure the appearance of sling is good before
using.
As using the tool measuring device, the operator's head or hands should stay away
And hang a warning sign, marked "under maintaining" to avoid mistakes caused by
non-related personnel actions.
When the processing program ends, do not touch the spindle and chuck before they
totally stop.
This machine should not be used in possibly explosive environments.
How to select the appropriate coolant and lubricant products? Addition to refer to
manual information, you can negotiate with the local agents to get the relevant
from to avoid danger.
Do not remove the iron filings by hands, should use the brush to avoid cutting.
When the chip conveyor is running, the operator's hands should away from opening
end to avoid caught.
When perform the maintenance work, should turn off the main power.
(8)
(9)
(10)
(11)
(13)
(12)
not used for a long term. Be sure to replace the coolant, otherwise this may easily
lead to diseases caused by bacteria or virus.
When the tool spindle or spindle table positioning, do not move them by external
force. Otherwise may cause unpredictable and dangerous actions.
It should have sufficient lighting in processing area.
information. Coolant should be changed regularly, especially when the machine is
(14)
(15)
The operator shall not be allowed to modify the clamping device installed on the machine.
Please contact the maker if need modifying to avoid unexpected factors and accidence.
1.
Overall security
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
