R AD AR
34
The forward key of spindle worktable: As this function key is "ON", the spindle
(4)
worktable rotates in positive direction.
(5) The stop key of spindle worktable: As this function key is "ON", the spindle
worktable stop rotating.
(6) The reverse key of spindle worktable: As this function key is "ON", the spindle
worktable in reversed rotates direction.
(7)
HANDLE mode and JOG mode, when the function key is ON,
(8) The directional key of spindle worktable: As this function key is "ON", the
spindle worktable will be performed positioning action after rotating twice in
(9) The jog key of spindle worktable: As this function key is "ON", the spindle
worktable rotated by jog mode.
Spindle speed load instrument (Figure 4.9): If there are speed drop between
(11)
spindle and setting speed as running, check the spindle speed load table to
confirm the speed of spindle.
manual mode is active.
positive direction.
CW
STOP
CCW
MANUAL
MODEL
ORCM
JOG
Start key for manual model (MANUAL MODEL): In RAPID mode,
JOG mode relieve. Press 4 seconds or press + at the
(10)
same time.
STOP
STOP
RESET
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
