R AD AR
37
LIGHT
G.H/L
AIRBLOW
TOOL
4.2.7
The gear shifting keys of spindle worktable: It is active in RAPID mode, and
(1)
JOG model. Firstly select “MANUAL MODEL” button As this function key is
(2)
(panel lights) and is "OFF" for low-speed gear .(panel lights)
(3) As the AIR switch is "ON", then the compressed air ejected from processing
The Coolant start key: It is active in RAPID mode, HANDLE mode and JOG
(4)
mode. As this button is "ON", cutting coolant pump started.
The tool measuring out: It is active in HANDLE mode and JOG mode,
As this key is "ON", the tool measuring arm stretched out and performed
External control function keys
"ON", the speed of spindle worktable switches to high-speed gear.
Working light switch: it is active for all modes. As this function key is "ON" in
any modes, working lights turned on.
nozzle. If this function is turned off the processing nozzle will be temporarily
closed when executing M06, M00 or M01 (active).
CTS coolant start key: It is active in RAPID mode, HANDLE mode and JOG
the tool probe. When the tool measuring start,the light will on.
(5)
mode, as this button is "ON", the CTS coolant pump started.
(6)
LIGHT
G.H/L
FORWD
BACK
AIRBLOW
TOOL
Figure 4.15
H/G
L/G
3 sec timer (This feature is optional)
WASH.T
COOLANT
WASH.T
COOLANT
APO
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
