R AD AR
40
The reset key of left positioning pin of beam: Used in the maintenance mode,
let the left side of the positioning pin of beam reset.
moving the cross rail, in avoid causing personnel or mechanical damage!
(6)
(Refer to 4.3.2 beams maintenance mode)
Please make sure the personnel on safe position away from machine before
The reset key of right positioning pin of beam: Used in the maintenance mode,
let the right side of the positioning pin of beam reset.
moving the cross rail, in avoid causing personnel or mechanical damage!
(7)
(Refer to 4.3.2 beams maintenance mode)
Please make sure the personnel on safe position away from machine before
The push-out key of left positioning pin of beam: Used in the maintenance
mode, let the left side of the positioning pin of beam push-out.
moving the cross rail, in avoid causing personnel or mechanical damage!
(8)
(Refer to 4.3.2 beams maintenance mode)
Please make sure the personnel on safe position away from machine before
The push-out key of right positioning pin of beam: Used in the maintenance
mode, let the right side of the positioning pin of beam push-out.
moving the cross rail, in avoid causing personnel or mechanical damage!
(9)
(Refer to 4.3.2 beams maintenance mode)
Please make sure the personnel on safe position away from machine before
L- FOR
L- BACK
R- FOR
R- BACK
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
