R AD AR
42
4.2.10
As in HANDLE mode and JOG mode, can carry on crossrail moving.
(1)
As switch (Figure 4.19) the selector of crossrail position to one point, the
(2)
Crossrail position selector switch
Z axis should be zero return and push down the crossrail move button
After the moving of crossrail, the display will show (Figure 4.18)the position of
crossrail and visually measure the R/L positioning blocks on right position or
not and to ensure the safety.
(START)(Figure 4.20)on panel, the crossrail will start to move to selected
position.
damage!
before moving the crossrail, in avoid causing personnel or mechanical
Please make sure the personnel on safe position away from machine
(3) Regarding the adjustment of crossrail position and troubleshooting, please
refer to the chapter 4.3 the operating and maintaining of crossrail.
4.2.11 Tool number display, Tool change switch:(this feature is optional)
The two-digit display (Figure 4.21) on the right side of the existing tool number
(1)
for the tool axis. The two-digit display on the left side for the magazine in the
(2)
tool change position number. In AUTO mode, press MANUAL MODEL button.
As the magazine rotated, the left side of the display will display the number in
accordance with the rotating position of the magazine.
When select the tool number (Figure 4.22) press the tool change function
key(TOOL CHANGE) (Figure 4.23) and push cycle start button.
The right side of display depends on the tool called number.
You also can call the required tool in manual data input (MDI).
Machine will automatically perform the automatically tool change program.
1
2
3
4
5
1
2
3
5
4
START
Figure 4.18
Figure 4.19
Figure 4.20
Figure 4.21
Figure 4.22
Figure 4.23
4
5
6
7
8 9 10
16
15
14
13
12
11
3
2
1
17
18
TOOL
CHANGE
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
4.
Operating
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
