R AD AR
5
1.1
1.2
Machine safety requirements
so we recommend that all operators to remember these safety tips and following safety
instructions.
The machine has several safety features. It can prevent accidental injury to the operator.
However, we do not recommend that operator over-rely on those safe model,
1.2.1
a.
b.
Notice of before the machine power on
Turn the main power switch to "ON"
Press down "ON" button of control panel.
(1)
(2)
(3)
The control panel and electrical box should be properly closed.
Keep work area clean.
Turn the power supply on comply with following steps.
1.2.2 Notice of before the machine power on
(1)
(2)
Check the oil volume every.
The types of lubricants should be in accordance with manufacturer’s
recommendations.
(3)
(4)
The spindle and gear lubricants should be selected in accordance with manual
recommendations.
The using of lubricants should be the requirements of operating manual.
(5)
Should be maintained and replaced regularly.
To clean the cooling system of electrical box and the filters of oil cooler
according to the operating manual’s recommends.
(6)
(7)
To check the pressure gauge one by one in accordance with the manual.
Before open safety door, to push back the covers of control panel, electric box
and belt as starting perform maintenance, to ensure the power off, and work
area is safe.
The CNC operation and maintenance existing of different risk, it must be performed by a
qualified technician.
Users should note the related safety requirements and must read the operation manual
carefully before operating.
1.
Overall security
1.
Overall security
1.
Overall security
1.
Overall security
1.
Overall security
1.
Overall security
1.
Overall security
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
