R AD AR
80
Oil inlet
Oil supply key (Manual)
Motor
Oil pressure
Oil outlet
Total oil
Filtering mesh
Draining plug head
Level Switch
Figure 6.1
6.3.2 Adjustments of lubricating time
This type of lubricator supplies lubricant by PLC control. The supplying is according
to the request of operator.
How many about the quantity of lubricant should be injected or how long should
be injected, it decided by operator.
The operation theory of oil injectors are always based on the fixing time, oil quantity,
pressure and fist-supply. Hydraulic oil capacity is too low, will light up.
Lubricant start up oiling time: TMR NO.16 set 2000 for the boot immediately to
Lubricant filling time: set TMR NO.14 as 10000 means oiling generally for 10
the oil for 2 seconds.
Notice:Please refer COUNTER NO.16 axis movement counts to liberation
Notice:“Injector ON” stands for the time of motor running(TMR NO.14).
“Injector OFF” stands for the Interrupted time of motor running
( X )
seconds.
(COUNTER NO.16).
6.
Maintenance
6.
Maintenance
6.
Maintenance
6.
Maintenance
6.
Maintenance
6.
Maintenance
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
