6
5
KENT Smart RO Operations
Touch Screen Explained
i. Status Tab
n
n
Under normal workings conditions and without any fault, the users will be greeted with the screen as shown in the
figure 1. Upon touching any display, the details would be displayed on full screen.
When the storage tank gets filled the RO pump will turn off without flow rate. It would be indicated as shown in the
figure 2.
ii. Service Tab
n
n
In service tab, Product Service and product
Installation details are entered during installation or
during service.
This section is for Service people or official
purpose only
iii. Help Tab
n
Help Tab has two sub men
a.
Product Feature:
Describes the product and its features.
b.
Troubleshooting Guide:
Lists and describes
common faults and there remedies.
a. Product Features
n
n
n
Clicking on the product features sub menu will open a new window with features listed across. The screen displays
8 features (per screen), neatly arranged in the grid of 4 x 2.
Scroll down to know about other features. Clicking on any one of the Icon will open a new window giving a detail of
features selected.
To move back to the previous screen, Click on the return arrow icon.
Navigation Tabs
Note:
If no input is provided for more than 30 seconds, the display will automatically reset to home screen.
b. Troubleshooting
n
n
n
Clicking on the troubleshooting icon will open a new window listing out the most common faults and explaining
each one in details.
Use arrow button to move to the next screen.
To go back to the previous menu, click the return arrow at any point of time.
2
3
4
7
5
6
1
1. Navigation Tabs
2. RO Pump Status
3. Time
4. RO Flow Rate
5. Balance Filter Life
6. Warning/ Ok display
7. Purified Water quality display
