5.11. Kentix360 Cloud
Please read „Kentix360 Cloud“ and „Kentix SIM“.
5.12. Configuration
5.12.1.
General
Here, the system name is assigned to the AlarmManager.
German and English language for the configuration are available.
In addition, a communication key is assigned here in the "Security" section.
This is used to encrypt the communication of AlarmManager and MultiSensors.
It is also used to combine the AlarmManager with the "Kentix DoorLock" access system to arm and disarm
alarm zones via the Kentix AccessPoint.
The communication key has to be identical in all connected devices.
In the time settings section, up to 2 NTP time servers can be stored for the time synchronization.
If there is an Internet connection, the AlarmManager can request the already preconfigured servers.
5.12.2.
Network
Here you change the network configurations of your AlarmManager to integrate it into your network.
In addition to a fixed IP address, DHCP is also available.
To use the Kentix360 cloud and an email configuration with DNS server name, you must have a valid gateway
and DNS server.
5.12.3.
For e-mail alerting, an account with or without access data can be specified.
In addition - depending on the e-mail server - an encryption with an associated port must be selected.
When selecting an encryption type (STARTTLS / SSL), the corresponding standard port is automatically entered
as well. If necessary, it can be changed to any port.
5.12.4.
SNMP - Monitoring
The AlarmManager supports full SNMP functionality. Alarms can be sent as traps. In addition, the
AlarmManager can be configured for a polling via network monitoring systems. For this purpose, a MIB
(Management Information Base) for the SNMP target system can be downloaded.
Page
(07-2018, subject to change)
kentix.com
21
Al
a
rmMa
n
a
g
e
r
Sm
a
rt
Mo
n
ito
ri
n
g
NOTICE!
If your AlarmManager has been registered for the Kentix360 Cloud, all emails will be sent through the Cloud service. In
this case, no SMTP server needs to be configured, but it can be used as redundancy. If the AlarmManager does not
reach the Kentix360 Cloud, it will send the e-mails via the configured SMTP server.
NOTICE!
With the checkbox next to the field "Password" a test e-mail can be sent. This will be send to users configured as
administrator. If an error occurs, please check whether at least one administrator has stored a valid e-mail address.
Please also pay attention to eventually existing restrictions (Routing / Firewalls) in your network and if required check
the data like encryption type and communication ports together with the responsible IT administrator.
