>>The use of remote control button battery
1
、
The remote control uses a "CR2032" button battery, which can be
used for about 3 months. (Use 30 minutes per day).
2
、
When you press the button, the remote control L CD backlight
brightness is significantly weakened or the remote control host is not
sensitive, it means that the battery power is low, please replace with
new batteries.
3
、
When not using the product for a long time, please remove the
battery. Otherwise, it may cause battery leakage and cause machine
malfunction.
4
、
Please do not use batteries other than the specified types.
5
、
Do not install the wrong battery's positive and negative poles, with
the positive pole facing up and the negative pole facing down.
6
、
Do not use the battery in an environment above 45°C, otherwise it
will affect the performance and life of the battery.
7
、
Please dispose of the used battery in accordance with the city's
relevant environmental protection regulations.
B
、
0th gear massage intensity
C
、
Moderate heat
D
、
Timed 15 minutes
If you want to stop working, you can press and hold the remote control
" " button for 2 seconds to shut down, or press the host " "Shut
down directly.
3
）
“ ”Key using
In the off state, press the " " button on the host to enter the standby
state, and press the " " button on the remote control to turn on;
When it is on, short press the " " button on the host to turn off
When powering on, press and hold the remote control "" button for 2
seconds to power off
4
）
“ ”Key using
Pulse mode switching button, you can select six pulse modes by
pressing the remote control " " button, and the default setting is
mode 1 (automatic combination 1 mode) when power on. The intensity
is the first gear after each mode change. The six massage modes are
Mode 1: Automatic combination 1
Mode 2: Automatic combination 2
Mode 3: Scratch
Mode 4: Press
Mode 5: Roll
Mode 6: Beat
The automatic combination mode 1 and 2 are manual modes after the
automatic cycle, which automatically switches every minute. It is
recommended to use the automatic combination mode.
5
）
”"+" key using
Pulse intensity enhancement key. Each time you turn on the machine,
the intensity is set to 0 level. Press the "+" key once to increase the
intensity by one level. There are a total of 0-16 levels of intensity. The
massage should be at a self-acceptable intensity. It is recommended for
the first use Start to adapt with weak gears.
6
）
"-" key using
Pulse intensity weakening key, each time you press the "-" key, the
intensity will be weakened by one level, with a total of 0-16 levels.
7
）
“ ”key using
Press the " " button on the remote control to switch between three
heating modes, namely low heat (1), medium heat (2), and high heat
(3). The corresponding indications on the screen. When switched to
"0", the heat stops, and the default is medium heat
8
）
Timing adjustment
In the power-on state, short press the " " button on the remote
control to switch the timing time. The timing time is divided into 6
levels: 5, 10, 15, 20, 25, and 30 minutes. The default is 15 minutes.
It is recommended to use 1-2 times a day, electric pulse massage
for 15 minutes each time, and heating for 15-30 minutes each time
