background image

2

C-BX3

Warnings, Cautions and Others

¤

 CAUTION

The 

 button in any position does not disconnect the mains line.

Disconnect the mains plug to shut the power off completely (the 
STANDBY lamp goes off). The MAINS plug or an appliance coupler 
is used as the disconnect device, the disconnect device shall remain 
readily operable.

When the System is on standby, the STANDBY lamp lights red.

• 

When the System is turned on, the STANDBY lamp goes off.

• 
The power can be remote controlled.

¤ 

CAUTION

Battery shall not be exposed to excessive heat such as sunshine, fire 
or the like.

¤ 

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

Do not remove screws, covers or cabinet.

1. 

Do not expose this appliance to rain or moisture.

2. 

¤ 

CAUTION

Do not block the ventilation openings or holes. (If the ventilation 

• 

openings or holes are blocked by a newspaper or cloth, etc., the 
heat may not be able to get out.)
Do not place any naked flame sources, such as lighted candles, on 

• 

the apparatus.
When discarding batteries, environmental problems must be 

• 

considered and local rules or laws governing the disposal of these 
batteries must be followed strictly.
Do not expose this apparatus to rain, moisture, dripping or 

• 

splashing and that no objects filled with liquids, such as vases, shall 
be placed on the apparatus.
Do not apply strong force or hit a hard material on the top glass; 

• 

otherwise, the top glass may be broken and injury may result.
Do not drag or push the main unit/stand base on the floor or table. 

• 

Otherwise the foot spacers at the bottom of the main unit/stand 
base may peeled off or drop.

¤ 

CAUTION

Do not place a device weighing more than 20 kg on the apparatus. 

• 

Doing so may result in the device to falling down or the apparatus 
to toppling over, and injury may result.
Do not place a TV on the edge of the apparatus; otherwise, the 

• 

apparatus may topple over or break, and injury may result.
Do not apply strong force or hit a hard material on the top glass.

• 

The top glass is made of tempered glass. However, incorrect usage 
may result in the glass being broken and injury may result. Do not 
scratch the glass with a sharp material. If a scratch remains on the 
tempered glass for a long period, the glass may eventually break 
by itself. If the glass is scratched, contact your dealer.
Assemble the apparatus with two or more persons. Otherwise, 

• 

backache or injury may result since the apparatus is heavy. Be 
careful not to catch your fingers between the parts. Be sure to 
tighten the screws securely on each part to maintain the strength; 
otherwise, the apparatus may topple over, and injury may result.
Be careful about following when moving the apparatus.

• 

Remove any items on the top of the apparatus before moving it.

 

Do not hold the top glass when you move the apparatus, or 

 

injury may result.
Before moving the apparatus, turn the power off and remove 

 

the connection cords of any connected devices; otherwise, an 
accident may result.

Do not climb on to or sit on the apparatus; otherwise, the 

• 

apparatus may toppled over, and injury may result. Be especially 
careful where children are concerned. Do not place a device 
weighing more than 20 kg on the apparatus.
Take measures to prevent the apparatus from falling down or 

• 

toppling over. The apparatus or devices such as TVs may fall down 
and injury may result due to an accident such as an earthquake. Be 
sure to take appropriate measures.

¤ 

CAUTION: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate 
the apparatus as follows:

Front: No obstructions and open spacing.

1. 

Sides/Back: No obstructions should be placed in the areas shown 

2. 

by the dimensions below.
Bottom: Place on the level surface.

3. 

10 cm

Side view

(Front)

Wall

EN_C-BX3[E]f.indd   2

EN_C-BX3[E]f.indd   2

7/4/12   9:44:41 AM

7/4/12   9:44:41 AM

Summary of Contents for C-BX3-B













Reviews: