23
care and cleaning
O
Always switch off and unplug before cleaning.
O
Remove the lid and tool from the bowl before
cleaning.
O
When not in use store the stir tool, whisk tool,
bowl plug, spatula and Direct Prep attachment in
the storage box
)4
. The Direct Prep discs can be
stored in the storage bag supplied
,:
.
power
unit
O
Wipe with a damp cloth, then dry.
O
Never use abrasives or immerse in water.
bowl
temperature
sensors
O
Wipe with a damp cloth then dry thoroughly. Never
use abrasives or sharp instruments to clean the
sensors.
bowl/stir
tool/maxblade/knife
blade/
whisk tool
O
Refer to “RINSE” function section.
O
Wash the parts, then dry thoroughly.
O
If food sticks or burns on the inside of the bowl,
remove as much as possible using a spatula.
Fill the bowl with warm soapy water and allow
to soak. Remove any stubborn deposits using a
cleaning brush. Any discolouration of the bowl will
not affect its performance.
bowl drive shaft assembly/bowl plug
1 Unlock the drive shaft nut
(6
on the underside of
the bowl by turning in an anti-clockwise direction.
2 Then lift out the drive shaft
(1
or bowl plug
-2
.
3 Remove and wash the sealing ring
(2
or
-3
.
4 Brush the bowl drive assembly or bowl plug clean
with hot soapy water, then rinse thoroughly under
the tap.
5 Ensure the seal is refitted to the drive shaft or bowl
plug correctly before refitting to the bowl.
lid
O
Always dismantle the lid before cleaning:
1 Remove the filler cap.
2 Push the lid inner section
out.
3 Remove the seal
from the lid inner section
.
O
After washing, fit the seal back on to the outer
lid section with the thicker edge uppermost and
reverse the above procedure.
Note: Leaking from the lid will occur if the seal is not
fitted correctly.
direct
prep
Dismantle the attachment fully before cleaning.
O
For easier cleaning, always wash the parts
immediately after use.
O
Handle the cutting discs with care –
they are
extremely sharp.
O
To remove the lid
,2
from the base
,6
, hold by
the feed tube
,1
and turn in an anticlockwise
direction. Then lift off.
O
Tower: Do not immerse in water. If the tower is
accidentally immersed in water, ensure that all the
water has drained out before reassembling the
attachment.
steaming
basket
O
Wash the parts, then dry thoroughly.
dishwashing
Alternatively the washable parts are dishwasher
safe.
Item
Suitable for
dishwashing
Bowl
Bowl drive shaft + seal
Slow cook plug + seal
Outer lid, inner lid section and
lid seal section
Filler cap
Direct Prep outlet cover
maxblade
Knife blade
Stir tool
Whisk tool
Steam tray base, shelf and lid
Storage unit
Direct Prep pusher, lid,
slinger plate, base and
extension chute
Cutting discs
Tower
Spatula
Disc storage bag
Lid adapter
Summary of Contents for CCL45
