8
To use your
in-bowl illumination
• Your Kitchen Machine is fitted with an
in-bowl illumination feature
(3
located on
the underside of the mixer head.
• To turn on and off, lightly press the
in-bowl illumination touch pad
.
To remove and fit
outlet covers
High-speed outlet cover
1 To remove the cover, use the grip on the
side and lift upwards.
2 To fit, place the cover over the outlet and
push downwards.
Slow-speed outlet cover
(2
1 To remove the cover, use the grip on the
underside and pull outwards.
2 To fit, locate the catch at the top of the
cover into the outlet recess and push to
clip into position.
To assemble
The splashguard assembly consists of
2 pieces: the head shield
)1
and the
splashguard
)2
.
The splashguard cannot be fitted to the
bowl unless the shield is fitted.
1 Raise the mixer head until it locks.
2 Clip the head shield upwards onto the
underside of the mixer head
until fully
located.
3 Fit the bowl onto the base.
4 Lower the mixer head.
5 Rest the splashguard on the bowl rim
and then slide forward until fully located
(1
.
• During mixing, ingredients can be added
directly to the bowl via the feed chute.
6 To remove the splashguard simply slide
it away from the mixer bowl.
7 To remove the head shield, raise the
mixer head until it locks. Remove the
tool if fitted, then pull the head shield
downwards from the underside of the
mixer head.
Note: Only fit or remove the splashguard
when the mixer head is in the locked
position.
We recommend that the head shield
is removed regularly from the mixer
head for cleaning.
To fit and use
your Splashguard
