4
INITIAL SETTINGS
INITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the
<Setup>
screen. (Page 41)
1
<Language>
(Page 43)
Select the text language used for
on-screen information.
• Set
<GUI Language>
to
display the operation buttons
and menu items in the
selected language (
[Local]
:
initially selected) or English
(
[English]
).
<AV Input>
(Page 42)
Select an external component
connected to the iPod/AV-IN2
input terminal to play.
<R-CAM
Interrupt>
(Page 42)
Select
[On]
when connecting
the rear view camera.
<Panel
Color>
(Page 42)
Select the color of the buttons
on the monitor panel.
2
Finish the procedure.
The
<Top Menu>
screen is displayed.
Setting the security function
You can set a security code to protect your receiver
system against theft.
R
Registering the security code
1
Display the
<Top Menu>
screen.
On the source control screen:
2
Display the
<System>
setting screen.
3
Display the
<Security Code Set>
screen.
• To clear the registered security code, perform
steps
1
and
2
, then press
[CLR]
in
<Security
Code>
.
4
Enter a four-digit number (
1
), then
confirm the entry (
2
).
• Press
[Clear]
to delete the last entry.
• Press
[Cancel]
to cancel the setting.
5
Repeat step
3
to confirm your security
code.
Now, your security code is registered.
• When the unit is being reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then press
[Enter]
.
DDX̲Entry̲M.indb 4
DDX̲Entry̲M.indb 4
2013/10/30 14:48
2013/10/30 14:48
