Clock settings
1
Display the Home screen.
2
Display the <Clock> screen.
On the Home screen, touch as follows:
Then, on the
<Setup>
screen, touch as follows:
[System]
<Clock> : [Enter]
• You can also display the
<Clock>
screen by
touching the clock area on the Home screen.
3
Set the clock time.
E.g. Clock settings screen for
DDX4018BT
Getting Started
Getting Started
4
Repeat step 3 to confirm your security
code.
Now, your security code is registered.
To clear the registered security code:
Touch
[CLR]
for
<Security Code>
in step 2.
Then, enter the current security code to clear and
touch
[Enter]
.
• When the unit has been reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then touch
[Enter]
.
Activating the security function
You can activate the security function to protect your
receiver system against theft.
1
Display the <Setup> setting screen.
On the Home screen, touch as follows:
2
Activate the security function.
On the
<Setup>
setting screen, touch as follows:
[System]
<SI>: [ON]
The security function is activated.
The security indicator on the monitor panel flashes
when the vehicle ignition is off.
To deactivate the security function:
Touch
[OFF]
in
step 2.
<Synchronize>
•
NAV
*1: Synchronizes the clock time with the
connected navigation unit.
•
Radio Data System
*2: Synchronizes the clock
time with FM Radio Data System.
•
DAB
*3: Synchronizes the clock time with the
Digital Radio (DAB).
•
OFF
: Sets the clock manually. Touch
[
J
]
/
[
K
]
to
adjust the hour, then minute.
–
Touching
[Reset]
will set the minute to “00”.
*1 Only for DDX4018DAB/DDX4018BT: Appears only when a
navigation unit is connected.
*2 Only for DDX4018BT/DDX318BT.
*3 Only for DDX4018DAB.
6
ENGLISH
00_DDX318BT_EN_ENG.indb 6
00_DDX318BT_EN_ENG.indb 6
13/6/2017 9:43:23 AM
13/6/2017 9:43:23 AM
