English
55
Menu items
Selectable setting/item
Initial:
Underlined
Connection
♦
Connect
♦
Disconnect
:
☞
page 48
:
☞
page 48
PIN Code
Changes the PIN code of the unit.
• Enter a new PIN code, then press [
Enter
].
Device Name
Shows the device name to be shown on the Bluetooth device — “KENWOOD
BT MM-6U2.”
Device
Address
Shows the device address of the unit.
Phone
Device*
1
Shows the connected phone device name.
Audio
Device*
2
Shows the connected audio device name.
Auto
Connect
♦
OFF
♦
ON
: Cancels.
: The connection is automatically established with the last
connected Bluetooth device when the unit is turned on.
Bluetooth
HF/Audio
Select the speakers used for Bluetooth (both phone use and audio player).
♦
Front Only
♦
All
: From front speakers only.
: From all speakers.
Initialize
Hold [
Enter
] to initialize all settings you have made for using Bluetooth
mobile phone and Bluetooth audio player.
Auto
Response*
1
♦
OFF
♦
ON
: The unit does not answer the calls automatically. Answer
the calls manually.
: The unit answers the incoming calls automatically within
5 seconds.
SMS Notify*
1
♦
OFF
♦
ON
: The unit does not inform you of the arrival of a message.
: The unit informs you of the arrival of a message by ringing
and displaying “Receiving Message.”
Ring Mode*
1
♦
System
♦
Phone
:
Selects the ring tone set on the unit.
:
Selects the ring tone set on the mobile phone. (This
function may not work depending on the mobile phone.)
Ring Tone
Change*
1
When <
Ring Mode
> is set to <
System
>, press [
Enter
], then select the ring
tone for received calls and SMS from <
Tone1
>, <
Tone2
>, <
Tone3
>.
♦
Call Tone
♦
Message
Tone
:
Selects the ring tone for phone calls.
:
Selects the ring tone for SMS.
*
1
Appears only for <
Handsfree Mode
>.
*
2
Appears only for <
Bluetooth Mode
>.
EN_LVT2271-001A_MX.indb 55
EN_LVT2271-001A_MX.indb 55
11/11/22 16:07
11/11/22 16:07