68
DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M
Accessories/Installation Procedure
Accessories
1
..........1
2
..........1
(2m)
3
*
1
..........1
4
*
2
..........1
5
*
2
..........1
6
..........6
7
..........6
8
*
3
..........1
(3m)
9
..........1
*
1
DDX6031BT/DDX6031/
DDX4031BT/DDX4031
of sale in Australia only.
*
2
DDX6031BT/DDX6031/
DDX4031BT/DDX4031
of sale in Australia,
China only.
*
3
DDX6031BT/
DDX6031BTM/
DDX4031BT/
DDX4031BTM only.
Installation Procedure
1
To prevent a short circuit, remove the key
from the ignition and disconnect the
-
battery.
2
Make the proper input and output wire
connections for each unit.
3
Connect the speaker wires of the wiring
harness.
4
Connect the wiring harness wires in the
following order: ground, battery, ignition.
5
Connect the wiring harness connector to
the unit.
6
Install the unit in your car.
7
Reconnect the
-
battery.
8
Press the reset button.
9
Perform the Initial Setup.
2
WARNING
•
If you connect the ignition wire (red) and the
battery wire (yellow) to the car chassis (ground),
you may cause a short circuit, that in turn may start
a fire. Always connect those wires to the power
source running through the fuse box.
•
Do not cut out the fuse from the ignition wire
(red) and the battery wire (yellow). The power
supply must be connected to the wires via the fuse.
After the Installation
After the installation, perform the Initial Setup
by referring to the instruction manual.
¤
•
Mounting and wiring this product requires skills
and experience. For best safety, leave the mounting
and wiring work to professionals.
•
Make sure to ground the unit to a negative 12V
DC power supply.
•
Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
•
Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
EN_LVT2271-001A_MX.indb 68
EN_LVT2271-001A_MX.indb 68
11/11/22 16:08
11/11/22 16:08