Settings
Settings
<Sound Effect>
Adjust the sound effect.
<Loudness>
Adjusts loudness.
•
OFF
(Initial)/
Low
/
High
<Bass Boost>
Selects the bass boost level.
•
OFF
(Initial)/
Level 1
/
Level 2
/
Level 3
/
Level 4
/
Level 5
<Drive Equalizer>
Reduces the driving noise by raising the bandwidth.
•
OFF
(Initial)/
ON
<Space Enhancer>
*1
Virtually enhances the sound space using the Digital
Signal Processor (DSP) system. Select the enhance
level.
•
OFF
(Initial)/
Small
/
Medium
/
Large
<Supreme>
*2
Restores the sound lost due to audio compression to a
realistic sound.
•
OFF
/
ON
(Initial)
<Realizer>
Virtually makes the sound more realistic using the
Digital Signal Processor (DSP) system. Select the sound
level.
•
OFF
(Initial)/
Level 1
/
Level 2
/
Level 3
<Stage EQ>
Moves the center of the sound to the lower or higher
point. Select the height.
•
OFF
(Initial)/
Low
/
Middle
/
High
*1 You cannot change the setting when “Radio” is selected as the
source.
*2 This function works only when “DISC”/ “USB”/ “iPod”/
“Android™” is selected as the source.
<Fader/Balance>
Touch
[
J
]
/
[
K
]
/
[
H
]
/
[
I
]
or drag the
mark to adjust.
<Fader>
Adjusts the front and rear speaker output balance.
When using a two-speaker system, set the fader to the
center (
0
).
•
F15
to
R15
(Initial:
0
)
<Balance>
Adjusts the left and right speaker output balance.
•
L15
to
R15
(Initial:
0
)
To clear the adjustment:
Touch
[Center]
.
<Speaker/X’over>
Setting the speakers and crossover
frequency
1
Select a car type (
1
), select the location
of the speakers (
2
), then display the
<Speaker Select> screen (
3
).
2
Select the speaker type (
1
), select the size
of the selected speaker (
2
), then display
the <X’over> screen (
3
).
• If a speaker is not connected, select
<None>
.
• When setting the front speakers, also select the
speaker size for
<Tweeter>
.
41
ENGLISH
EN̲DDX2018ST̲KR.indb 41
2017/05/17 9:28
