54
DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
Calling by Voice Recognition
Calls by recognizing the registered voice.
⁄
• In order to perform voice recognition, voice must
be registered in the Phonebook data. See <Voice
Registration> (page 56). Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See <Key Word Voice Registration> (page 57).
1
Display the Voice Recognition screen
2
Utter the voice registered in the
PhoneBook
1
Utter within 2 seconds after the Beep.
1
Cancels voice recognition.
If the voice recognition is succeeded and
there is only one phone number found:
2
Make a call.
2
Displays the phonebook list.
Hands Free Unit Control
If you hear another Beep sound:
Speak the key word within 2 seconds after the
Beep, or touch the [Phonebook List] button to
select the phone number.
Make a call.
⁄
• If there are more than one phone numbers registered
under the same name, and the key word voice is
registered for each phone number, you will hear another
beep. For how to register key word, see <Key Word Voice
Registration> (page 57).
If there are more than one phone numbers
registered under the same name, go to step
3.
3
Select a Phone number category
4
3
8
6
5
7
3
Calls the displayed phone number.
4
Creates an SMS to the displayed address.
See <SMS (Short Message Service)> (page
59).
5
Selects the Phone number category.
6
Scrolls the phone number.
7
Displays the Phonebook data list.
8
Returns to the Hands-Free Control screen.
4
Make a call
⁄
• A message is displayed if the voice is not recognized.
Read the message for the further operation.
B64-4254-00̲00.indb 54
B64-4254-00̲00.indb 54
08.10.30 7:02:45 PM
08.10.30 7:02:45 PM
