Connection/Installation
78
When installing the antenna on the right
side
30 mm
@
Ceramic line (black part)
Earth sheet *
!
150 mm
When installing the antenna on the left
side
150 mm
30 mm
!
Earth sheet *
@
Ceramic line (black part)
NOTE
• *Where the earth sheet of Amplifier (accessory
@
)
can be pasted on the metal part of the front pillar.
#
CAUTION
When installing the antenna cable
inside a front pillar that contains an air
bag
• The front pillar cover is secured with a special clip
which may need to be replaced when the front pillar
cover is removed.
Contact your vehicle dealer for details on replacing
the front pillar cover and availability of replacement
parts.
Clip
Front pillar cover
• Install the amplifier unit (accessory
@
) above the air
bag so that the antenna and the air bag.
Air bag
@
Front pillar
●
Determining the antenna installation
location
1) Remove the front pillar cover of your car.
Front pillar cover
2) Clean the windscreen with the supplied
cleaner (accessory
~
).
~
• Wait until the glass surface is completely
dry before pasting.
• If the glass surface is cold, such as during
winter, warm it with defroster or dryer.
3) Remove the first sheet (tag 1) of film antenna
(accessory
!
) horizontally and paste the
antenna on the front glass.
Sheet (tag 1)
!
• Do not touch the pasting surface (adhesive
side) of the film antenna (accessory
!
).
!B5A-2486-00_18DDX_M_En.indb 78
2018/02/20 9:38