Other External Components
54
■
[
Front Camera Settings *
]
1
Adjusts the CMOS-3xx series with ID 2 ("Front
Camera") set. For details, see the instruction
manual of your camera.
■
[
Front Camera Interruption
]
*
2
[
10 sec
]
/
[
15 sec
]
(Default)/
[
20 sec
]
: The front
camera screen is displayed when return the
gear from the reverse (R) position.
[
OFF
]
: Cancel.
*1 When CMOS-3xx series is connected with
this unit.
*2 When CMOS-3xx series or front camera is
connected with this unit.
To adjust the parking guidelines
NOTE
• Install the rear view camera in the appropriate
position according to the instruction manual
supplied with the rear view camera.
• When adjusting the parking guidelines, make
sure to apply the parking brake to prevent the car
from moving.
1
Touch
[
ON
]
of
[
Parking Guidelines
]
in the
Camera screen.
2
Touch
[
Guidelines SETUP
]
on the Camera
screen.
3
Adjust the parking guidelines by
selecting the
mark.
4
Adjusting the position of the selected
mark.
A
B
C
D
Make sure that lines
A
and
B
are
horizontally parallel, and that lines
C
and
D
are of the same length.
NOTE
• Touch
[
Initialise
]
and then touch
[
Yes
]
to set all
the
marks to their initial default position.
!B5A-2486-00_18DDX_M_En.indb 54
2018/02/20 9:38
