Controlling Audio
63
English
Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the
[
MENU
]
button.
h
h
Popup menu appears.
2
Touch
[
Audio
]
.
See the following section for each
setting.
• Set up speaker/ X’over (P.64)
• Controlling equalizer (P.66)
• Set listening position/ DTA (P.69)
• Controlling general audio (Fader /
Balance) (P.66)
• Set volume offset (P.67)
• Performing zone control (P.68)
• Set sound effect (P.69)
• Memory/recall the audio settings
3 way speaker system setup
Select the appropriate crossover network
mode according to the speaker system (2-way
speaker system or 3-way speaker system).
1
Press the
[
HOME
]
button.
h
h
HOME screen appears.
2
Touch
[
]
.
h
h
Source selection screen appears.
3
Touch
[
STANDBY
]
.
4
Press the
[
G
]
(
1
) button and the
[
S
]
(
2
)
button for 1 second at the same time.
1
1
2
2
h
h
Speaker system select screen appears.
5
Select the crossover network mode.
h
h
A confirmation screen appears.
6
Touch
[
Yes
]
.
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Zone Control
– Fader of Controlling General Audio
– Front focus of Listening Position/ DTA
– Select the speakers to output the sound from
cell-phone of Blutooth HF/Audio
– Beep of User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
!B5A-2486-00_18DDX_M_En.indb 63
2018/02/20 9:38
