41
ENGLISH
REVERSE
PRK SW
¥
]
Installation and Connection
Installation and Connection
Wiring connection
10 A fuse
Connect the antenna cord to the aerial terminal.
USB input terminal (1 m)
Purple with white stripe
Light blue with yellow stripe
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
Yellow (A4)
Light green
To the car’s reverse lamp harness when using the optional rear view camera
To the remote adapter (not supplied) which is compatible with your car
To the power control terminal when using the optional power amplifier (Or) To the aerial control terminal in the vehicle
Not used.
Extension wire (
ø
)
To the car’s parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
Connector B
Connector A
Connecting the ISO connectors
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Default wiring
Red (A7)
Vehicle
Unit
Red
(Ignition wire)
Yellow (A4)
Yellow
(Battery wire)
Pin
Color and Function
Connector A
A4
A5
A6
A7
A8
Yellow
Blue/White (output B)
Orange/White
Red
Black
: Battery
: Power control
: Dimmer
: Ignition (ACC)
: Ground connection
Connector B
B1/B2
B3/B4
B5/B6
B7/B8
Purple
]
/ Purple/Black
[
Gray
]
/ Gray/Black
[
White
]
/ White/Black
[
Green
]
/ Green/Black
[
: Right speaker (Rear/Tweeter*)
: Right speaker (Front/Mid Range*)
: Left speaker (Front/Mid Range*)
: Left speaker (Rear/Tweeter*)
* For 3-way speaker system
connection, see page 40.
Blue with white stripe (output A)
Brown
Note: Total output for blue with white stripe wires (output A +
output B) is 12 V
350 mA.
EN̲DDX2018TC̲E.indb 41
EN̲DDX2018TC̲E.indb 41
2017/11/29 15:51
2017/11/29 15:51