background image

APPS—Android Auto™/Apple CarPlay

15

English

WebLink™ Operation

You can display and control the App on the 

unit while your smartphone is connected to 

the USB terminal.

 

Ñ

Available Apps

You can use the following Apps on this 

unit. Install the Apps on your smartphone 

beforehand.

WebLink™

WebLink™ enables you to use the following 
Apps with the unit.

• Media player
• Yelp
• YouTube
• OpenWeatherMap

Connecting a smartphone

•  Connect an Android device via USB 

terminal.

 

(P.62)

•  Connect iPhone using KCA-iP103 via USB 

(Black) terminal.

 

(P.61)

•   When the smartphone is connected 

to the unit, a confirmation message to 

communicate each other appears on the 

smartphone. Touch 

[

Allow

]

 to establish 

connection, or 

[

Ignore

]

 to cancel the 

connection.

•  You can check the connection status 

on the WebLink™ screen on your 

smartphone.

 

Ñ

Operation buttons and 

available Apps on the App 

screen

To enter WebLink™ mode, touch 

[

WebLink

]

 

icon in the source selection screen. (P.10)

WebLink source screen

1

1

 

[

]

Displays the main menu of the “WebLink” 
source screen.

 

Returns to the previous screen.

Operate on your smartphone.

•  When you are asked to communicate 

between your smartphone and the unit, 

touch 

[

Allow

]

 to proceed.

 

Ñ

Switching to the App screen 

while listening to the another 

source

Press the 

[

]

 button.

NOTE

•  If sound is output using WebLink when the App 

screen is displayed, the source is switched to 
WebLink.

!B5A-2302-00b_DDX_X_En.indb   15

2019/04/26   10:41

Summary of Contents for DMX8018S









































































Reviews: