background image

Bluetooth Control

32

Using Hands-Free Unit

You can use telephone function by connecting 

the Bluetooth telephone to this unit.

NOTE

•  While Apple CarPlay or Android Auto is being 

connected, Bluetooth Hands-Free function and 
two Bluetooth devices connections cannot be 
used. Only Apple CarPlay or Android Auto Hands-
Free function can be used.

 

Ñ

Make a call

Touch 

[

Û

]

.

h

h

Hands Free screen appears.

NOTE

•  If your mobile phone supports PBAP, you can 

display the phone book and call lists on the 
touch panel screen when the mobile phone is 
connected.

 

– Phone book: up to 1000 entries

 

– Up to 50 entries including dialed calls, received 

calls, and missed calls

Select a dialing method.

• 

[

]

: Call using call records

• 

[

]

: Call using the phonebook

• 

[

]

: Call using the preset number

• 

[

]

: Call by entering a phone number

• 

[

]

: Voice Recognition (P.33)

 

Select the cell-phone to use

When you connect two cell-phones

1) Touch 

[

]

 to select the phone 

you want to use.

 

Bluetooth SETUP

1) Touch 

[

]

.

Bluetooth SETUP screen appears.

NOTE

•  The status icons such as battery and antenna 

displayed may differ from those displayed on the 
cell-phone.

•  Setting the cell-phone in the private mode can 

disable the hands-free function.

Call using call records

Touch 

[

]

.

Select the phone number from the list.

Call by entering a phone number

Touch 

[

]

.

Enter a phone number with number keys.

Touch 

[

]

.

!B5A-2302-00b_DDX_X_En.indb   32

2019/04/26   10:41

Summary of Contents for DMX8018S









































































Reviews: