background image

Controlling Audio

46

Controlling Audio

NOTICE

•  Each operation in this section can be started from 

the multi function menu.

You can adjust the various settings such as 

audio balance or subwoofer level.

Press the 

[

MENU

]

 button.

h

h

Popup menu appears.

Touch 

[

Audio

]

.

See the following section for each 

setting.

•  Set up speaker/ X’over (P.47)
•  Controlling equalizer (P.49)
•  Set listening position/ DT(P.52)
•  Controlling general audio (Fader / 

Balance) (P.49)

•  Set volume offset (P.50)
•  Performing zone control (P.51)
•  Set sound effect (P.51)

3 way speaker system setup

Select the appropriate crossover network 

mode according to the speaker system (2-way 

speaker system or 3-way speaker system).

Press the 

[

HOME

]

 button.

h

h

HOME screen appears.

Touch 

[

]

.

h

h

Source selection screen appears.

Touch 

[

STANDBY

]

.

Press the 

[

S

 (

1

)

]

 button and the 

[

CAM

]

 

(

2

) button for 1 second at the same time. 

2

1

h

h

Speaker system select screen appears.

Select the crossover network mode.

h

h

A confirmation screen appears. 

Touch 

[

Yes

]

.

NOTE

•  When the 3-way speaker system is selected, the 

following functions are disabled. 

 

– Zone Control

 

– Fader of Controlling General Audio 

 

– Front focus of Listening Position/ DTA

 

– Select the speakers to output the sound from 

cell-phone of Blutooth HF/Audio

 

– Beep of User Interface Setup

•  Connecting 3-way speakers with the 2-way mode 

selected can break the speakers. 

!B5A-2302-00b_DDX_X_En.indb   46

2019/04/26   10:41

Summary of Contents for DMX8018S









































































Reviews: