Controlling Audio
69
English
Speaker/ X’over setup
1
Press the
[
MENU
]
button.
h
Popup menu appears.
2
Touch
[
Audio
]
.
h
Audio screen appears.
3
Touch
[
Speaker/X
ʼ
over
]
.
Touch
[
Speaker
]
.
4
Select a car type.
You can setup the car type and speaker
network, etc.
If your car type is selected, the Delay Time
Alignment is set automatically (for timing
adjustment of sound output for each
channel) to have the highest surround
effects.
5
Touch the speaker (
1
) you wish to adjust
and set each item (
2
) as follows.
1
2
■
Speaker
You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are set,
the speaker crossover network is set
automatically.
■
Location (Only for Front, Rear)
Select the speaker position you have fixed.
■
Tweeter (Only for Front)
(
)
You can set the tweeter when you are
selecting front speakers.
None, Small, Medium, Large
■
X’over (
)
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
For details, see
When Speaker network is set to 3 way
(
):
1
2
NOTE
• For how to switch to the 3-way speaker system,
see
3 way speaker system setup (P.70)
Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
• Select “None” if you have no speakers.
Ñ
Crossover network setup
(
)
You can set a crossover frequency of speakers.
1
Touch
[
X
ʼ
over
]
.
2
Touch the speaker to set.
Summary of Contents for DNX317BTS
Page 97: ......
