72
DNX9280BT
Setup Menu
Security Setup
You can set a security code to protect your receiver
system against theft.
⁄
• When the Security Code function is activated, the
code cannot be changed and the function cannot be
released. Note the Security Code can be set as the 4
digit number of your choice.
1
Display the Security screen
Touch [
]
>
[
]
>
[System]
>
[Security].
(page
)
2
Setup the SI (Security Indicator)
[Security Code Set]
Displays the Security code
input screen.
[SI]
Turns the SI function on or off.
If turned "ON", the security indicator on the front
panel flashes when the vehicle ignition is off.
( "ON")
3
Start Security Code setup
⁄
• If you have already completed the code registration,
[CLR] is displayed.
4
Enter a security Code
Input four-digit number.
5
Register your security code
6
Reenter the security code
Reenter the same security code as that you have
entered in Step 4 for confirmation.
⁄
• If you enter a different security code, the screen
returns to Step 4 (for the first code entry).
7
Register the security code again
Now, your security code is registered.
If you have pressed the Reset button or if you
have disconnected the Receiver from battery...
1
Enter the correct security code
You must enter the same security code as that
you have entered in Step 4.
2
Register your security code
Now, you can use your Receiver.
Summary of Contents for DNX9280BT
Page 19: ...English 19 Next page 3 Basic Operation ...
Page 59: ...English 59 ...
Page 95: ...English 95 ...
