78
DNX9280BT
Setup Menu
AV Output Interface Setup
You can set AV output parameters.
1
Display the AV-OUT Interface screen
Touch [
]
>
[
]
>
[AV-OUT Interface].
(page
)
2
Set each item
[AV-OUT]
Selects an AV source to be output at
the AV OUTPUT port. ( "VIDEO1")
⁄
• USB source cannot be selected when two iPods are
connected.
Camera Setup
You can set Camera parameters.
1
Display the Camera Setup screen
Touch [
]
>
[
]
>
[Camera SETUP]. (page
2
Set each item
[Rear Camera]
Selects the type of rear camera to
use. ( "Other")
"CMOS-300":
When the CMOS-300 with ID 1 set
is connected.
"Other":
When the other camera is connected.
[R-CAM Interruption]
Sets a method to switch
to the rear view camera video display. ( "OFF")
"ON":
Switches to the rear view camera video
display when engaging the shift knob of car to
"Reverse" and then pressing the [AUD] button
for longer than 1 second.
"OFF":
Switches to the rear view camera video
display, press the [AUD] button for longer than
1 second.
⁄
• The function of the [AUD] button needs to be
set to "CAM" in [AUD Key Longer than 1 Second]
beforehand.
[R-CAM Settings]
Adjusts the CMOS-300 with ID
1 set. For details, see the option manual.
[Front Camera]
Turn this setting on when the
CMOS-300 with ID2 set is connected. ( "OFF")
[F-CAM Settings]
Adjusts the CMOS-300 with ID
2 set. For details, see the option manual.
Summary of Contents for DNX9280BT
Page 19: ...English 19 Next page 3 Basic Operation ...
Page 59: ...English 59 ...
Page 95: ...English 95 ...
