11
Preparations
DVF-3200/DVF-3250 (EN/K,E,X)
INPUT
SCART
INPUT
AUDIO
VIDEO
R
L
S VIDEO
System Connections
Caution:
Do not plug in the power lead until all connections are completed.
Make connections as shown below.
When connecting the related system components, re-
fer also to the instruction manuals of the related com-
ponents.
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the mi-
crocomputer referring to "
In case of difficulty
".
¤
Connecting to a TV with video (composite) or S-video input terminal
Audio cord
TV
Rear panel example
(for U.S.A.)
Connecting to a TV with SCART input terminal (For Europe)
TV
SCART cable (Commercially available)
DTS disclaimer clause
When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is
connected to an amplification system.
To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to
the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.
Note
Note
Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the
copy protection system.
* Connect only either the video (com
posite) cord or the S-video cord.
Rear panel example
( For Europe)
*S-video (Commercially available)
(Except for Europe)
^
"TV Output Select
(only for Europe)"
Video cord
*5547/01-14/EN
05.1.24, 2:58 PM
11