background image

27

DVF-3200/DVF-3250 (EN/K,E,X,)

Operations

Select Audio Language 

If the disc was created with different language tracks,
you can use the AUDIO key on the remote to temporarily
change the DVD player’s Audio setting.
With DVD-RW discs recorded in VR mode that have both
a main and a Bilingual audio channel, you can switch
between Main (L), Bilingual (R), or a mix of both (Main +
Bilingual) by pressing AUDIO.

1. The language feature only works if the disc was cre-

ated with multiple audio tracks.

2. When you chose an audio language by the 

AUDIO

key, you only override the audio language setting in
the DVD Player's main menu (in the Language Pref-
erences menu within Setup menu) temporarily.

During playback, press  the AUDIO key on the re-
mote.

Notes

Notes

Movie disc playback features

Select the Audio channel 

During VCD playback, press the AUDIO key on
the remote.

Each press the key switches the mode.

1

LEFT

2

RIGHT

3

STEREO

You can choose to play back only the right or the left
channel of audio recorded on the disc, or you can select
stereo playback.

The language is switched each time the AUDIO

key is pressed.

Using  Marker 

The marker  feature lets you mark a point on the disc that
you can go to quickly. You can store up to 9 marker
points

Create the Marker

1

When you reach the scene you want to mark,
press MARKER key.

2

Press the Cursor right/left (

2

/

3

) keys on the re-

mote to select a marker number that you want
to recall or cler.

To recall or clear a marked scene

1

During playback, press the SEARCH key on the
remote.

÷

The marker icon appears on the TV screen briefly.

÷

Repeat to enter up to 9 marker points.

÷

The marker search menu appears on the screen.

3

Press the ENTER key to playback from the
marked scene or press the CLEAR key to clear
the selected number.

Clearing all marker points

÷

 The marker points are cleared each time a disc is removed

from the player or when the power is turned off.

Notes

Notes

÷

If all 9 marker points are in use, you can still mark new scenes,
but the previous marker points will be erased.

÷

Depending on the disc, the marker function may not work.

÷

P.B.C. on mode of VCD, the marker function does not work.

(

To recall

To clear

Audio language icon

Audio channel icon

Marker icon

Marker search icon

(DivX)

(DVD)

*5547/21-31/EN

05.1.24, 2:58 PM

27

Summary of Contents for DVF-3200





































Reviews: