13
EN
6
Press
program
button (
PROGRAM
button on
the remote control) again to store the radio
station.
Repeat steps
3
to
6
to store other preset ra-
dio stations.
Note:
During program, if no button is press within 20 sec-
onds, the system will exit program mode automatically.
Tuning to a preset radio station
Press
p.call/album up
button (
P. CALL +
button
on the remote control) or
p.call/album down
button (
P. CALL –
button on the remote control) or
digit buttons (0~9) on the remote control to se-
lect the desired preset number.
•
The preset number and radio frequency will
appear on the display.
STEREO/MONO
Press the
STEREO/MONO
button on the remote
control to select mono or stereo mode.
•
When stereo mode is selected, the icon
“STEREO” will appear on the display (if cur-
rent station is FM stereo).
Note:
You are able to select stereo or mono mode in FM band
only.
Using RDS (Radio Data System)
(For the Europe only)
RDS is a system that transmits useful informa-
tion (in the form of digital data) for FM broadcasts
along with the broadcast signal. Tuners and receiv-
ers designed for RDS reception can extract the
information from the broadcast signal for use with
various functions, such as automatic display of the
station name.
RDS functions:
PTY (Program TYpe Identification) Search
Automatically tunes to a station that is currently
broadcasting the specified program type (genre).
PS (Program Service Name) Display:
Automatically displays the station name transmit-
ted by the RDS station.
Using the radio
Radio Text function:
Displays the radio text data transmitted by some
RDS stations when you press the
RDS/DISPLAY
button. There is “NO TEXT” display if no text data
is transmitted.
•
The icon “R·D·S” appears on the display when
an RDS broadcast (signal) is received.
Note:
Some functions and function names may differ certain
countries and areas.
Using the RDS/DISPLAY button
(For the Europe only)
While receiving a RDS station, pressing the
RDS/
DISPLAY
button on the remote control changes
the contents of the display.
•
PS (Program Service name) display:
The station name such as BBC is displayed
automatically when an RDS station is received.
If no PS data was sent, “NO PS” is displayed.
•
RT (Radio Text) display:
Text data accompanying the RDS broadcast
scrolls across the display. “NO TEXT” or “RT -
---” is displayed if the current RDS station does
not provide any RT data.
•
Frequency display:
Displays the frequency of the current station.
Tuning by Program TYpe (PTY
search)
(For the Europe only)
This function lets you set the tuner to automati-
cally search for stations which are currently broad-
casting the type of program (genre) you want to
listen to.
1
Press
TUNER band
button (
TUNER/BAND
button on the remote control) to TUNER mode.
2
Press
TUNER band
button (
TUNER/BAND
button on the remote control) to select FM.
3
Press
PTY
button on the remote control.
If the current station is with RDS, the program
type of the station is displayed.
continued to next page
*5469/08-20/EN
04.6.1, 11:20 AM
13
