18
EN
ENGLISH
Program recording from a CD/MP3-CD/WMA-
CD
Desired CD tracks/MP3 files/WMA files can be
programmed in the desired sequence and re-
corded onto a tape.
1
Insert a blank cassette tape into the tape deck.
2
Press
CD
button to CD.
3
Insert a disc and make sure that the unit is in
stop mode.
4
Program the desired sequence of CD tracks/
MP3 files/WMA files.
See page 10 and 11 for programming proce-
dure.
5
Press
rec
button (
REC
button on the remote
control) to set the unit into recording standby
mode.
The icon “REC.” appears on the display.
6
Press
6
button or
to begin recording.
7
Press
7
stop
button to end recording.
Using the cassette
Recording from your personal computer
1
Insert a blank cassette tape into the tape deck.
2
Press
TUNER band/USB
button (
TUNER/
BAND/USB
on the remote control) and select
USB.
•
When this unit is connected to your computer
with a USB cable and the unit detects the com-
puter, “USB LINK” is displayed.
See page 13 for the procedure.
3
Perform the playback operation on your com-
puter.
For the operation of your computer, refer to
the instruction manual of your computer or the
manual of the audio reproduce software.
4
Press
rec
button (
REC
button on the remote
control) to set the unit into recording standby
mode.
The icon “REC.” appears on the display.
5
Press
6
button or
to begin recording.
6
Press
7
stop
button to end recording.
5572/08-24/EN
05.3.29, 4:54 PM
18
