7
EN
ENGLISH
Names and functions of parts
1
CD tray
2
Remote sensor
3
button
To switch the system on or to standby mode.
standby
indicator
4
CD
button
To select CD input or turn the system on to CD
input.
5
TAPE
mode
button
To select TAPE input or turn the system on to
TAPE input. When in TAPE input, press to
select a tape reverse mode.
6
TUNER band
/
USB
button
To select TUNER input or turn the system on
to TUNER input. When in TUNER input, press
the select the waveband: FM or AM.
To select USB input by pressing the button
repeatedly.
7
/
–
¢
/
4
buttons
To search forward/backward to next/previous
track for CD; to skip tracks for CD; to search
for ward/backward or to skip to the next/
previous album for MP3 and WMA; to fast
forward or rewind a tape; to tune to higher/
lower radio frequency or search radio stations
for TUNER; to set the hour and minutes for
clock; to set timer function for timer.
8
phones
jack
9
7
stop
button
To stop playback for CD or TAPE; to stop pro-
gram for CD.
0
6
buttons
To start or interrupt playback for CD.
(
6
button
only)
To start or interrupt playback for TAPE.
!
rec
button
To record from TUNER, CD or USB to a cassette
tape.
@
program
button
To program disc tracks for CD; to program
preset radio stations for TUNER. To set or reset
clock for clock. To set or reset timer for timer.
#
Cassette tape compartment
$
0
open/close
button
To open the CD tray.
%
Clock and timer related buttons
timer on/off
button
To switch the timer on/off.
timer set
button
To view the clock or set the clock.
^
p.call/album down
/
up
buttons
To select a preset radio stations for TUNER.
To select an album of MP3 and WMA.
&
EQ/X-bass
button
To select the desired sound effect: POP,
CLASSIC, ROCK, JAZZ or FLAT; to switch on/
off X-BASS mode.
*
VOLUME
knob
To increase or decrease the volume.
(
demo
button
To activate/deactivate the demonstration in
power on mode.
Standby mode
While the standby indicator is lit, a small amount
of power is supplied to the system to back up the
memory. This is called standby mode. Under the
condition, the system can be turned ON by the
remote control unit.
5572/01-07/EN
05.3.29, 4:53 PM
7
