6
Troubleshooting guide
Problem
Cause
Solution
The juicer will not start/
does not operate.
• No power.
• Juicing bowl not properly
aligned on power unit or lid
not locked correctly.
• Make sure the appliance is
plugged in.
• Check that all parts are
fitted correctly.
The juicer has stopped
during normal operation.
• Food clogging in feed tube
or at top of scroll.
• Clogging in filter and scroll.
• Food not cut into small
enough pieces.
• Press the reverse button
for 3-5 seconds. Repeat
the process 2-3 times until
blockage cleared.
• Do not attempt to open the
lid by force.
• Switch off, unplug and
remove the lid. Check if
any clogging. Remove food
if necessary and continue
juicing.
• Juicer overloaded or
overheated due to heavy
load.
• Switch off, unplug and take
the juicer apart. Clear and
reassemble the juicer.
• Plug in and press the
“Reset” button and hold
for 1-2 seconds and start
operation as normal.
Juice is leaking from
underneath the bowl.
• Pulp stopper not fitted
or has come loose during
operation.
• Check that the pulp outlet
stopper is fitted correctly.
Juice does not exit juicing
outlet.
• Anti-drip stopper closed.
• Remove stopper and allow
juice to flow into juice
container.
Too much pulp coming
out in juice.
• Filter or scroll clogging.
• Very fibrous fruit/vegetable
being processed.
• Cut food, especially fibrous
foods, into smaller pieces to
avoid the fibres wrapping
around the scroll.
Staining on juicing parts.
• Natural colouring from food.
• Rubbing with a cloth dipped
in vegetable oil will help to
remove discolouring.
There is a squeaking noise
when juicing.
• Friction between
ingredients and bowl.
• Normal operation.
Summary of Contents for JMP85
Page 3: ...MAX 13 11 12 14 15 1 2 3 4 5 6 7 9 10 8 ...
Page 4: ...100ml 600ml A B C E D F G H ...
Page 5: ...I J K N O L M ...
Page 133: ......